Drinking water may have high TDS levels giving it a salty and a disagreeable taste. The level of TDS in the water is raised by the presence of potassium, sodium, and chlorides. However, the presence of hazardous ions in water, such as lead, nitrate, cadmium, and arsenic, can cause a variety of detrimental health issues.
Because, of our top-notch technologies, Netsol Water top-quality Commercial RO Plants ensure that these levels are not impacted. However, let’s help you to understand the importance of checking and monitoring the TDS levels in water.
Why is it important to check the TDS levels in your water?
You should test the TDS level in your water for a number of reasons. Some of them are as follows:
· Health and safety
Water's flavour is altered by TDS levels above a particular point, becoming salty, bitter, or metallic. Above a specific threshold, the TDS of water indicates the presence of toxic minerals that are bad for one's health.
· Hardness
Water that has a high TDS content is hard, which results in scale build-up in pipes, dry hair, stains on utensils, and malfunctioning kitchen appliances.
· Presence of harmful contaminants
TDS levels that are higher than a particular threshold indicate the presence of hazardous contaminants and chemicals. If you use a Commercial RO Plant, make sure to pair it with a water softener to make the water drinkable, since hard water is caused by high TDS levels.
How is TDS in drinking water decreased?
There are many high-tech water purification systems on the market today that not only remove excess TDS, but also have a variety of other smart features that are essential for removing contaminants from the water.
RO and UV filtration are used in Commercial RO Plants from Netsol Water, which allows 100% water to pass through the RO membrane ensuring that you only consume the healthiest and safest water available. Also, the water is exposed to UV light every four hours to maintain its cleanliness at all times.
Removing TDS (total dissolved solids) from water
One of the best ways to control or remove high TDS is to use a Commercial RO Plant. There are several techniques that can be used to achieve this.
Reverse Osmosis
By applying pressure to a synthetic membrane and forcing water through it, reverse osmosis completely eliminates TDS, and only molecules smaller than 0.0001 microns in diameter can flow through the membrane's tiny pores. Because, the molecules of dissolved metals and salts are bigger than water molecules, water squeezes through the membrane while leaving the metals and salts behind.
How does the Netsol’s Commercial RO Plant assist in delivering clean water for drinking?
As TDS only measures the total amount of dissolved solids in water, it is not the only indicator of water quality. Water contamination can actually take many other forms, including toxins from industrial wastes and improper use of pesticides and fertilizers. Dangerous biological and chemical elements that cannot be seen or tasted are also present in the water.
Some of these pollutants are quite dangerous in nature and can seriously harm human health. This makes a strong argument in favour of using a good water purification system. The Netsol’s Commercial RO Plant range not only keeps excess TDS levels in check and removes them, but also gets rid of pollutants and heavy metals.
High water efficiency
When compared to other water purification systems, which typically have recovery rates of 25–30%, our Commercial RO Plants have a high recovery rate of 60-70 %, allowing you to conserve water.
RO and UV purification at 100% efficiency
Because, to its sophisticated multi-stage water filtering system, our Commercial RO Plants deliver drinking water that is 100 percent pure, secure, and sweet-tasting. Through the many filtration processes, viruses, bacteria, pesticides, chemicals, smells, and other contaminants are all successfully eliminated.
Use of UV technology
The UV lamp used in UV systems by Netsol Water solutions is built to last for 10,000 average operating hours. But, after typically 6000 litres of water have been cleansed, you simply need to change the filters. If you receive a filter-changing alert, it is advised that you call our expert staff for efficient maintenance.
Conclusion
The human body needs pure water that is devoid of biological and chemical impurities, with a pH value of 7, a controlled TDS level, and an ideal taste. Investing in a quality water purification system is essential. Water that is pure, clean, safe, and healthful to drink will keep you and your family healthy.
Installing the right water filter might be helpful when dealing with high water TDS levels. In accordance with US-EPA regulations, Netsol Water Commercial RO Plants, not only filter water to make it 100% safe but also remove excess TDS, to achieve the appropriate water TDS levels.
The system purifies your water to make it safe and healthy to drink by removing dangerous bacteria, viruses, chemicals, pesticides, and heavy metals. Also, our combination of water purification techniques replaces crucial minerals, like calcium and magnesium.
Our Commercial RO Plants provide water that is safe and healthy!
With cutting-edge water filtration technology, purchase the best RO plants from us. These are ISO certified, BIS approved, and in high demand in the water treatment sector, due to their ability to convert untreated, contaminated water into usable and pure water.
To guarantee you get the most out of your equipment, we also offer installation, training, commissioning, and support. For further information or to make a product purchase, contact us at +91-9650608473 or drop a mail at enquiry@netsolwater.com