Effluent Treatment Plant for Hospitals
Hospitals are considered one among the most important consumers of water. utilized in drinking, washing, and general medical applications, water is an integral a part of every hospital and medical building. it's mandatory for a hospital to treat the water in correct manner, following environmental guidelines and meeting all relevant standards so as to place a positive impact on health and safety of patients, staff, and people around. So the importance of a leading effluent treatment plant manufacturer for hospital comes into the picture, who not only supply and install the ETP plants but also have years of the experience. Netsol Water is best turnkey solutions provider for Hospital ETP plants.
Guidelines for Hospital Biomedical (Hospitals Effluent) Waste - ENVIRONMENTAL STANDARDS & GUIDELINES FOR MANAGEMENT Standards for Liquid Waste in India
The effluent generated from the hospital should conform to the following limits:
PARAMETERS |
PERMISSIBLE LIMITS
|
---|---|
pH |
6.5-9.0
|
Suspended solids | 100 mg/l |
Oil and grease | 10 mg/l BOD (3 days at 27°C 30 mg/l COD 250 mg/l Bio-assay test 90% survival of fish after 96 hours in 100% effluent ) |
These limits are applicable to those hospitals which are either connected with sewers without terminal sewage treatment plant or not connected to public sewers. For discharge into public sewers with terminal facilities, the general standards as notified under the Environment (Protection) Act, 1986 shall be applicable.
Product Details:
Minimum Order Quantity | 1 Unit |
Installation Type | Containerized Plug & Play |
Industry | Commercial Building |
Water Source | Effluent Water |
Capacity | As Per Requirement |
Feed Flow Rate | As Per Product Design / Size |
Impurities To Be Removed | BOD,COD,TDS,Oil & Grease |
Treatment Stages | combination of Secondary treatment and Tertiary treatment process |
Secondary Treatment Type | Membrane Bed Bioreactor |
Automation Grade | Automatic |
Features | End use of Treated water - Gardening,Flushing,Floor washing |
Treated Water Quality | BOD Less than 10 mg/L,COD Less than 50 mg/L |
Manufacturing Lead Time | 4-6 Weeks |
Control Module | Control Module Available |
Filtration System | submerged hollow fiber membranes |
Pore Size | 0.06 |
Retention Time | 5 Hr. HRT |
Material | MSEP,MSEP+FRP,TOTAL FRP,STAINLESS STEEL |
Voltage | 220 V,440 V |
Inlet Water Quality | BOD 250 - 400 mg/L,COD 500 - 600 mg/L |
Deal In | New Only |
Hospital Effluent Treatment Plant / Waste Water
Hospital Wastewater Treatment System
Unique Hybrid Advanced wastewater treatment system incorporates a electrocoagulation and Electrogen (electro-oxidation) cells to treat this hospital wastewater during a simple once-through process making it suitable for reuse.
Some Key Facts about Hospital Wastewater in India
- 1. Average water consumption by hospitals is approximately 750 L/d/b.
- 2. A 100 bed hospital generates about 200 litres of urine and 50 kg of contaminated faeces.
- 3. About 90% of consumed prescribed drugs ultimately find yourself in wastewater.
- 4. 15 – 20 you look after the medicines utilized in hospitals are potentially bio-accumulative.
We at Netsol Water is leading manufacturer of sewage treatment plant for small hospital in Delhi - NCR, India. We slo deals in Hospital biomedical waste treatment and Hospital Effluent Treatment Plant Manufacturer. Call on 9650608473 or email us on enquiry@netsolwater.com.