What is ETP Commissioning in India?
The goal of effluent treatment is to reduce polluting substances to the standards laid down by the “Ministry of Environment and Forests (MoEF)”, of the Government of India (GOI) as per Environment Protection Rules, 1986, which cannot be relaxed by State Pollution Control Boards (PCB), but they can prescribe more stringent standards specific to the discharge environment, and the specified limits of faecal coliforms laid down by the National River Consequences (NRCD).
There are various basic functions of commissioning-
(a) Owners' Point of View- Did we get what we paid for in terms of an improvement once the project was completed?
(b) Engineers' Point of View- Can we demonstrate that we kept our promises made during design?
(c) Contractor's Point of View- Did we complete the project according to the plans and specifications?
(d) Viewpoint of a Regulator - Has a regulatory concern been addressed?
To commission equipment’s, we need a well-defined plan that includes-
(b) Methods for determining the effectiveness of the system. (For example, a chlorine feed system must be capable of releasing a specific chlorine residual, as well as a method for measuring the output of our metering pumps using an analyser);
(c) Methods for examining all kinds of monitoring and control, for example, pump control in "local mode" or via a process control network;
(d) The ability to simulate anomalous operating modes.
ETP Commissioning in India
The effluent treatment plants in India are effective in treating industrial wastewater. No matter, whether you need it for industrial or commercial use, Netsol Water is a pioneer wastewater treatment plant manufacturer offering best wastewater management solutions, including effluent treatment plants using state-of-the-art technology to get rid of physical and biological impurities of wastewater to make the water safe to be disposed of in freshwater bodies or make it useable for gardening or flushing.
Effluent treatment plants offered by us are quite effective in removing all kinds of chemical, physical, and biological impurities from the wastewater, and hence are extensively demanded across beverages, textile, automobiles, sugar mills, and pharmaceutical industries, among other industries.
Our effluent treatment plants are known for long service use and are economically viable to operate and have maximum compliance with the regulatory authorities’ norms. Our service team stands right beside the clients while the entire commissioning of effluent treatment plants anywhere in India to train the on-site employees of the clients and to impart post-commissioning technical assistance if required.
Basic Principles for ETP commissioning
1: Ensure that all documentation is in order and that operational issues are addressed during the design and pre-construction phases.
2: Before turning on any piece of equipment, make sure you have a commissioning strategy in place.
3: Check that the commissioning plan corresponds to the intended construction and demolition sequence.
4: Commissioning should begin at the system's "field" end and work its way up the hierarchy of control and monitoring functions physically further away from the field.
5: Plant personnel need to see demonstrations of operations. They receive further training that is critical for system adoption and long-term reliability.
6: Documentation must be updated on a regular basis to ensure that what we did throughout the commissioning process. It appropriately reflects what was installed and that any software/firmware configuration modifications are properly documented.
7: All employees should be confident in their ability to maintain and decommission equipment.
8: Maintain detailed notes and a complete list of corrective measures.
9: Before declaring everything finished, double-check all items on the list of corrective actions.
What is the purpose of a Commission Visit?
The goal of effluent treatment plant commissioning visit is to thoroughly inspect the treatment unit's installation. This could include mechanical and electrical inspections as well as a review of the unit's installation.
1: Commissioning ensures that the unit and all associated equipment’s have been properly installed and are completely compatible with Indian rules and site-specific approvals.
2: Incorrectly installed equipment’s not only voids warranties and may result in costly repair bills, but it can also result in significant fines. A commissioning visit will reveal any issues with your effluent treatment systems, and it may be the most important visit you make to your equipment.
Netsol Water is Greater Noida-based leading water & wastewater treatment plant manufacturer. We are industry's most demanding company based on client review and work quality. We are known as best commercial RO plant manufacturers, industrial RO plant manufacturer, sewage treatment plant manufacturer, Water Softener Plant Manufacturers and effluent treatment plant manufacturers. Apart from this 24x7 customer support is our USP. Call on +91-9650608473, or write us at firstname.lastname@example.org for any support, inquiry or product-purchase related query.