There are both inorganic and organic components in the water. Among the organic components that can be found in drinking water are bacteria, algae, pesticides, and disinfectants. Inorganic compounds include elements like calcium, sodium, lead, arsenic, chlorine, etc.
What is the water's TDS level?
TDS levels in water can vary for a variety of reasons, thus, it's crucial to know each constituent in areas where the water supply has TDS levels that are either too high, or too low for regular consumption.
TDS is a component of drinking water that is produced by a number of processes, including plumbing, sewage, urban runoff, industrial wastewater, chemical water treatment, and chemical fertilizers used in gardens. It occurs because water is an all-purpose solvent that easily draws impurities and can swiftly absorb and dissolve them.
Effect of TDS on water
Despite not being unhealthy, high TDS levels in drinking water do give the water a salty, bitter, or brackish taste. Calcium and magnesium are two minerals that are frequently found and can cause hard water, the growth of scale, and discoloration.
Effects of High TDS Levels
TDS is quantified in parts per million (ppm). TDS levels in water are thought to be best between 50 and 150 (less than 300) ppm. TDS levels of 1000 ppm or above are considered unsafe for human ingestion.
Drinking water with high TDS levels on a regular basis can result in major health risks, like typhoid and diarrhoea.
Effects of Low TDS Level
A low TDS level is regarded as acceptable. TDS levels less than 50 ppm, however, have no nourishing effects on the human body.
Are total dissolved solids a bad thing in water?
Do not forget that TDS is not necessarily a bad thing. Minerals with "beneficial" TDS properties can be found in environmental components, like carbonate deposits and mineral springs. One common type of TDS is salts, which can get into drinking water through coastal erosion, or even through de-icing substances, used on city roadways.
TDS levels in drinking water
For water to be suitable for human consumption, the TDS level must be within an acceptable range of up to 300 parts per million (ppm). When the TDS level is above 300 ppm, the water may taste salty and have a high concentration of salts and other minerals, like sodium and potassium.
What TDS level is suggested for RO water filtration?
For any measurement above 300 ppm, reverse osmosis technology should ideally be incorporated for additional water purification. Commercial RO plants use certain membranes that retain a substantial fraction of these dissolved solids, in order to give clean water.
Why is it crucial to check the water's TDS levels?
Drinking water may still have high TDS levels, giving it a salty, unpleasant taste. The addition of potassium, sodium, and chlorides raises the TDS level. But dangerous ions like lead, nitrate, cadmium, and arsenic that are present in water, can have a negative impact on your health in a number of different ways.
Netsol Water Commercial RO Plants make sure that these levels are not crossed. There are a variety of reasons why you should assess the TDS content of your water. Here are some factors:
· Safety and Health
TDS concentrations above a certain degree change the flavour of water, making it taste salty, bitter, or metallic. The TDS level of water reveals the presence of hazardous minerals that are harmful to one's health, when it exceeds a certain level.
· Hardness
Hard water causes scale building in pipes, dry hair, stains on utensils, and broken kitchen equipment, since it has a high TDS concentration. By monitoring the TDS level in the water, you can avoid similar issues in the future.
TDS levels that are higher than a particular threshold indicate the presence of hazardous contaminants and chemicals. To make the water drinkable if you're using a RO Plant, be sure to pair it with a water softener.
Check TDS levels before RO-plant purchasing!
Today, a RO Plant is a basic requirement for homes or businesses. The amount of water we drink has a significant impact on our health. When you've made up your mind to buy water purification equipment, there are a few important factors to take into account:
One of the most crucial goals that is sometimes ignored is testing the water's quality, before choosing a filter. TDS levels under 200 ppm are considered to be ideal for drinking. RO (Reverse Osmosis) water plants are necessary to treat groundwater, since its TDS concentrations are frequently between 500 and 3,000 ppm. Thus, RO is considered as the best water purification device for Indian homes.
If you use Netsol’s water treatment products, including commercial RO plants and water softeners, they offer technology for water recovery that can save 60% of the water. With the use of a pump, a RO plant employs high pressure to force water through a membrane with pores as small as 0.0001 microns. Pollutants and dissolved contaminants are left behind, as water molecules pass them.
Benefits of using Commercial RO Plants from Netsol
It does occasionally occur for RO water treatment to remove significant minerals. But, because our plants can be customised to contain a mineral cartridge that adds essential minerals like calcium and magnesium, which are good for bones and teeth, you can be sure that you always get the health benefits of these minerals.
The majority of our Commercial RO Plants offer six phases of filtration, making the water palatable and secure for you and your family, as well as employees. There won't be any contamination of drinking water with unclean water, because to the meticulous and innovative technologies used. With a water tank that can hold up to 7 litres, you will always have access to fresh, delicious water throughout the day.
Conclusion
In the current atmosphere, when worry about pollution and the spread of infections has materialised into a severe hazard, using a commercial RO Plant ensures that your family receives 100% pure water, protecting them from viruses and germs. Because of this, it is not only the greatest water purification equipment, but also a wise and profitable investment.
Choosing a reputable commercial RO Plant manufacturer!
It may be important to select a reliable water filter from a reputable manufacturer, like Netsol Water. Our Commercial RO Plants have a 6-7 stage water purification process that gets rid of heavy metals like arsenic, fluoride, and nitrates, as well as harmful chemicals and TDS.
Additionally, these ROs have UV Technology, which successfully eliminates bacteria, viruses, cysts, microscopic parasites, pesticides, and meets with stringent criteria. You can now drink water that is 99.9% free of organic contaminants, because of the efficient UV sterilisation provided by these Commercial RO Plants.
We also offer design and manufacturing of Commercial RO Plants!
To guarantee you get the most out of your equipment, we also offer installation, training, commissioning, and support. For further information or to make a product purchase, contact us at +91-9650608473 or drop a mail at enquiry@netsolwater.com
