An interconnected system of pipes called a sewage system carries waste from a property to the main sewer. Gravity usually plays a role in this as the waste descends into the sewer. A sewage pumping station is used when the property is on lower land, and the main sewer is higher than it.
What is sewage pumping station?
The wet well is what makes having a sewage pumping station different from using the standard sewage system. This serves as a receiver for sewage from a property, i.e., it is situated lower than the home so that gravity can cause any waste to flow into it.
The sewage will then stay in the well until it reaches a specific level, at this point, a pump kicks in allowing it to climb uphill, out of the well until it reaches a position where it can travel to the main sewer on its own.
What are the typical sewage pumping station problems?
Sewage Pump Station's Issues
No matter how effective your pumping system is, problems will inevitably arise. Regular maintenance inspections should be performed, to lower the likelihood that something catastrophic will go wrong. But, it's also helpful to be aware of certain typical issues that could occur, so you know what to watch for.
· Backing-up in the toilets
Despite the fact that pumps are designed to reduce the likelihood of blockages, they could still happen. When flushed down the drain, fats, oils, or any other waxy deposits may harden, and clog the pumping chambers. Nothing will be able to pass through it if this occurs, causing toilets to back up.
· Pump isn't working
This can be brought on by a variety of reasons, such as dirt clogging the impeller, a lack of electricity, an obstruction in the pump that interferes with the electrics, or a malfunctioning pump.
· Not turning off the pump
This typically results from the control float switch getting trapped in the incorrect position, which keeps the pump turned on. Your pump may not be turning off if your electricity bills experience an unexpected surge.
· Leaking pipes
There are various indicators that your pipes are damaged, such as a clogged toilet, mould issues, slow drains, and foundation fractures. It is best to call a professional right away if you notice any indications that your pipes may be broken because, if you wait, a costly repair job may be necessary. You might be able to avoid these issues if you do routine maintenance checks, because they can catch problems early on.
· Alarms going off
If your pump station has an alarm, it ought to go off whenever it senses a problem. This might be anything from high water levels to a malfunction, so if you hear the alarm, be sure to get in touch with a consultant right away to lessen the risk of flooding.
Check for your pumping station's maintenance
The majority of difficulties mentioned can be readily avoided by performing routine maintenance inspections. They can maintain efficiency while also ensuring dependability, lower operating expenses, and effectiveness. During these inspections, all components are examined, and any minor damage is repaired to prevent it from getting worse.
Sewage pumping stations may occasionally go wrong, but that doesn't imply they are bad to use. In fact, they are highly useful and can offer a solution for those who live in lower-level properties.
Call us for the manufacture of Sewage Treatment Plants
If you're looking for a reputable business to do manufacture and yearly maintenance of your sewage treatment plant, go no further than Netsol Water. We have many years of experience in this industry, and are equipped to handle any task. Call us at +91 9650608473 or use our online platform to reach out to us right now.