Commercial RO system operates on the reverse-osmosis principle, which drives water through a semi-permeable membrane by reversing the osmotic pressure. A sizeable portion of the contaminants are eliminated by this semi-permeable barrier; around 95%–99% of the dissolved salts are left in the reject stream. The water pressure is based on the amount of salt in the supply water.
A higher concentration requires a higher pressure in order to overcome the osmotic pressure. During this process, the water gets more concentrated as it passes across the membrane. This helps to bring both sides into equilibrium. Therefore, RO Membrane is the crucial part of Commercial RO Plant, so, is the regular maintenance and service.
Now, let’s look at how often a commercial RO Plant requires maintenance and service.
RO membrane: Heart of commercial RO Plants
By acting as a barrier, the membrane keeps contaminants out of the water. There are many different arrangements for filter membranes. Reverse osmosis uses a semi-permeable membrane to let water molecules pass through. In this way, the membrane divides the water into many channels.
Why is commercial RO Plant’s maintenance and service time-sensitive? How often should a commercial RO Plant maintained and serviced?
A system will run well and with less to no downtime if RO system maintenance is completed on schedule. By spotting issues before they result in harm, routine maintenance and filter changes may maintain systems free of obstructions and functioning properly.
Regular cleaning keeps membrane deterioration at bay and preserves water quality, reducing the need for costly repairs. Commercial RO Plant should be maintained every 6 months, but it can vary as per the parts of the RO Plant.
1. Change RO membrane: All RO systems typically have a sediment/carbon prefilter to reduce chlorine, so that it does not contact the membrane.
Chlorine will damage the membrane, thus you must replace it as soon as possible. You might need to replace the prefilter every six months rather than once a year, in locations where the city water supply includes a lot of chlorine. Also, regular filter modifications aid in membrane protection.
The pre-filters safeguard the RO membrane!
The frequency of membrane replacement depends on the water type that enters your Commercial RO plant. To check if your RO membrane is functioning properly, use a TDS meter. When it starts to worsen, you can tell the membrane is getting close to the end of its useful life. Membranes for hard water must be updated every two to three years.
2. Drain RO storage tank: By emptying the tank, the Commercial RO plant can completely turn the water. When you simply use a small amount of water, the device only fills the top part of the tank. The tank is difficult for the RO system to fill, and the rejection isn't as good as it was when the tank was empty. In order to refill the water and keep the tank in good condition if you don't use a lot of water, drain it every few weeks.
3. Sanitise RO storage tank: Whenever you replace the RO membrane, make sure to sterilize the tank. All of the tanks eventually begin to generate slime. Every other year, run a cleaning solution through the system to get rid of slime.
Conclusion
If Commercial RO plants maintenance is done correctly, it will lengthen the system's lifespan and make it more affordable for the customers.
Commercial RO Plant manufacturer
Netsol Water Solutions is a well-known manufacturer of water treatment systems in India, which offers its customers simple and appropriate product maintenance and regular service. We also help our customers in keeping the commercial RO plants clean from time to time.
For further information, contact us at +91 9650608473 or email at enquiry@netsolwater.com
