What is the WWT solution for Semi-conductor manufacturing industries?
Every day, millions of litres of water are utilised in the production of semiconductors for both process and non-process purposes. It's a costly problem that's also attracting environmental attention. The semiconductor sector is being urged to reuse more of its water, but this is a difficult undertaking.
Toxic solvents, corrosion inhibitors, and other organic process pollutants are found in semiconductor wastewater. It's difficult to reduce, let alone remove, these pollutants to levels below detection.
Facilities that emit pollutants in their effluent streams can be shut down by regulators, and facilities that clean up ground water issues have received fines of Rupees. 7465 Million.
Water treatment solutions from Netsol Water are especially effective at treating specific organic compounds found in semiconductor wastewater.
The following services are available to you:
1: Solutions for Reuse of water
In this era of finite resources, we applaud and support some semiconductor companies' efforts to reuse 100% of non-process water. It is plainly the proper thing to do for the environment, and it will help safeguard the industry's environmental reputation. The economic savings that can be realised by increasing the volume of non-process water that is reused, however, may be a bigger driver. With one of the most environmentally friendly wastewater treatment methods in the market that is also incredibly cost effective when compared to alternatives, we feel quite at home with these drivers.
2: Solutions for treatment of water
The need for fresh water for cooling purposes is enormous, and it has a significant impact on manufacturing costs and the environment. Global businesses in this sector are pushing hard to improve water reuse for this application, with some setting goals of 100% water reclaim or re-use for all non-process water. This goal can only be reached by deploying unique technologies that allow for the achievement of the required water quality requirements for water reuse.
3: Advanced water purification procedure by a Specialist
Cleaning semiconductor wastewater is a multi-step procedure. There are a variety of contaminants to deal with, all of which must be eliminated to below the detection level. It's a specialised task that requires a thorough grasp of wastewater streams as well as sophisticated sensors for stream separation in order to optimise waste management and treatment.
Why do you receive the choice of a three-step delivery when you work with Netsol?
• We can test your water against a variety of our products to determine treatment efficacy and efficiency under a variety of settings, providing facts and insights to aid in the decision-making process.
• We can set up a pilot plant to evaluate and refine the treatment process in real-world situations, as well as over extended time periods to account for changing conditions.
• Data-driven full-scale design reduces risk by increasing cost and performance certainty early in the project. Netsol's on-site installation, commissioning, and optimization services ensures that you get the most out of your investment.
Working with Netsol Water has further advantages
1: There will be less/no chemical dosing: Because Netsol does not require chemical dosing, there are no chemicals to manage onsite, resulting in a low operating cost. This is due to a unique mix of adsorption (which concentrates pollutants onto the medium) and electrochemistry (which removes them from the media) for oxidation.
2: Maintenance is minimal: In addition to all of these advantages, our medium regenerates itself during the process, eliminating the need for replacement. The only maintenance required is a once-a-year media top-up that takes less than an hour. This means you won't need to invest in a backup system because Netsol has an extraordinarily high uptime.