According to the requirements of the plant, raw stone is either chopped or ground down into a useful material, through the process of stone cutting. The type of stone will then determine how it is polished for use in various industries, or treated with various finishes according to the intended usage.
This procedure generates wastewater, which needs to be gathered and reprocessed. After being collected, water fills a deep cone vertical thickener. Before entering the vertical thickener, flocculant is injected into the filthy water pipelines.
Water treatment solutions for Stone-Cutting and Dewatering
An effective wastewater treatment facility must have a clarifying process. Clarification, which separates water from the solid particles suspended in it, is a continuous operation, in contrast to the filtration performed by the filter press.
By designing and producing both vertical and horizontal decanters made of stainless steel or concrete, Netsol Water Solutions can provide customers any sort of decanter.
Press Filter Solutions
One of the earliest and most reliable pieces of dewatering machinery is the filter press. It is employed in a range of applications and industries for the treatment of wastewater. A filter press purges contaminants and suspended sediments from industrial wastewater, while also separating solids from liquids. This makes it simple for plant managers to control and get rid of waste, while replenishing their systems with clean water.
Filter presses divide particulates from liquids. The filter press specifically uses pressure filtration through a filter media, to separate liquids and solids. The slurry is then fed into the filter press, where it dewaters while under pressure.
Our filter presses are constructed from thick slabs of single-block steel using the plasma, laser, or water-jet production processes, using only premium parts from leading suppliers. Filter presses ensure optimal dehydration for any type of wastewater and slurry, thanks to high-tech attachments.
Packaged Wastewater treatment Plants
These are the ideal solution for your facility needs if you require a filter press, but lack the capacity for a large operation. These systems are created for compact operations. They compress the same fundamental ideas that underpin a typical filter press operation. These plants include a tiny make-down system, a tiny filter press, and a tiny mud condenser.
The design of a packed treatment plant allows for close looping of the water system, and fits in small, constrained locations. This implies that you won't constantly have to worry about buying water because you'll be able to reclaim your water, and keep using it in your operation.
Advantages of stone-cutting industries' treatment options
1. Dry sludge reduction of up to 85% which eliminates the need for disposal.
2. Usually no flocculant is necessary.
3. 100% re-used water.
4. Recovery of concrete materials.
5. Flexibility that makes it possible to put the plant anywhere, and without the need for an expensive base.
Water is a crucial component in quarry operations and stone cutting, polishing, and finishing. It lessens dust from activities and prevents instruments from overheating.
Before it can be used again, the water that was used in this process must be treated. We at Netsol Water, a producer of water treatment and wastewater treatment facilities, are offering you the greatest tools to make the process easier.