What is Industrial Water Softener? Need and benefit of Softener in Industry
Netsol Water will ensure that your industrial waste water meets standards for industrial water purification, passing inspections with flying colours, therefore, providing a complete line of standard and fully customizable water softening systems, as well as comprehensive maintenance for your industrial, commercial, or municipal softener system.
USAGE OF WATER SOFTENERS IN INDUSTRIES
A water softener is a device that softens water by removing the minerals that cause the water to be hard. It is best to use industrial water softeners in industrial settings where there is a lot of manufacturing and creation and a lot of water is needed. All of the advantages of a water softener will be available in this manner.
Industrial water softeners soften your water for industrial use by removing hardness with resin. The resin acts as an industrial hard water treatment, replacing the hardness in the water with salt (brine) that is periodically regenerated. Ion exchange is a process that removes harsh manganese, iron, calcium, and magnesium ions from your incoming water supply.
One will use less detergent, see less hard water build-up, save money on repairs from unnecessary wear and tear on industrial equipment, and be able to conduct business more effectively with softening.
Installing awater softener in an industry will keep your water heater from forming scale, allowing it to operate more efficiently. This will save you money month after month. A water softener, in addition to your water heater, will prevent mineral build- up in your pipes.
SIZE OF A COMMERCIAL SOFTENER IS DETERMINED BY TWO FACTORS
Exchange Capacity:The amount of water delivered between regenerations is referred to as the exchange capacity. It is also affected by the amount of ion exchange resin in the softener as well as the amount of salt used for resin regeneration.
Maximum Flow Rate: The amount of water required at any given peak usage period. It is critical to document this data in the event of a non-continuous water supply, and it is measured in gallons per minute (GPM).
ADVANTAGES OF COMMERCIAL AND INDUSTRIAL WATER SOFTENER
• Lower Chemical Consumption and Costs:Water softeners are intended to remove hardness from water. This is accomplished through the action of other chemicals present in the water softener, which neutralise the chemicals in hard water.
• Increased Equipment/Appliance Life:Hard water has a negative impact on the apparatus and equipment with which it comes into contact. It corrodes metal pipes and causes buildup in pipes, which can cause them to burst, resulting in infrastructure damage. All of these effects are avoided by using industrial water softeners, which ensure that only clean water is supplied and increase the life-span of the equipment or appliances.
•Improved Consistency in Water Quality:Industrial water softeners do much more than soften water, they also ensure that the water is safe to drink. Drinking water is always required in a manufacturing plant, factory, or hospital, and the use of an industrial water softener provides free drinking water.
•Reduced Repair and Maintenance costs:Proper maintenance practises are critical for extending the shelf life of all products, and these practises are especially important when such a machine or device is costly. There may be costs associated with facilitating maintenance, such as replacing chemicals, and because industrial water softeners consume less, the cost of maintaining them is lower.
