How to treat municipal waste water?
The process of removing hazardous contaminants from wastewater is known as municipal wastewater treatment. Domestic use is the primary source of pollution. Pollutants are handled using a variety of techniques, including physical, chemical, and biological processes. These days, municipal wastewater treatment is strongly advocated. This resource has been rehabilitated and is ideal for agricultural production. Treatment of municipal wastewater is critical.
Conventional municipal wastewater treatment follows a pattern.
Preliminary, Primary, and Secondary are the three patterns. Municipal wastewater is discharged into the open water. It may be reused water or surface water before being evacuated. Before the filth from the wastewater treatment procedure is treated and then biased to reuse in crop productions, some further steps may be required.
Why is waste water treatment a necessity now a days?
There was a period when a natural treatment process in lakes and rivers sufficed for our fundamental needs, but due to population growth and pollution, unnatural inventions are being used to address the basic dilemma.
The wastewater treatment plant's primary function is to enhance the natural phenomenon through which it can refine water.Industrial wastewater may contain contaminants that traditional sewage treatment cannot remove. Impurities must be filtered using more complex procedures.
Netsol Water is a technological company that specialises in municipal water treatment. We supply fully customised municipal water filtration and treatment systems based on our extensive experience as water treatment professionals. Netsol Water is always looking for new ways to improve our municipal water filtration and treatment systems by expanding our technology.
We now offer technologies in the following areas of water and wastewater treatment:
1. Screening & Grit Handling
Wastewater screening, grit removal, and handling equipment from Netsol Water is designed and manufactured as part of a complete range that is largely utilised in municipal wastewater treatment plants.
This equipment can also be used to treat solids separation for a variety of operations in the following industries:
>Fruit, vegetable, fish, and meat processing companies, as well as milk and cheese manufacturers, are all part of the food industry.
>Breweries, distilleries, and wineries are all part of the beverage industry.
>Plastics, paints, solvents, oil, and greases are all chemical businesses.
>Textile industries, such as tanneries and laundries.
2. Aeration & mixing:
Various products serve this process, enlisted below are some examples
>Low Speed Aerators
>Floating Brush Aerators
>Compressed Gas Mixing
3. Effluent/supernatant decanting (for Intermittent Biological & Aerobic Digestion processes)
4. Cloth media filtration
5. Sludge handling
>Sludge Dewatering
>Thermal Sludge Drying
6. UV disinfection – drinking water & wastewater
>UV Reactors
>In-channel UV systems
>Advanced Oxidation
7. Chemical dosing
>Polymer Preparation System
YOUR MUNICIPAL EQUIPMENT PROVIDER
From concept design through ultimate project delivery, Netsol Water solutions provide full design, costing, and technical support for these above mentioned technologies. Netsol is a technology provider for municipal projects. We may adjust our scope to meet the needs of any project delivery method or owner.
All of Netsol's installed equipment and systems receive comprehensive technical support, including spare parts and servicing. For our installed equipment and systems, we also provide Service & Maintenance Agreements that can be adapted to match the needs of the owner.
Contact us today to learn more about our municipal water treatment and filtration systems
