Is drinking water from Commercial RO Plants safe to consume?
One of the safest and healthiest solutions is to drink water from a purifier, particularly reverse osmosis water, as long as you frequently check the purifier or a Commercial RO Plant, to enhance its effectiveness.
Regardless of how new or old the RO Plant is, unless you periodically clean and maintain it, the water won't do you any good. For the best results, Netsol Water advises checking your Commercial RO Plant at least once every two months. Now, the question arises! How do we know that the drinking water from the commercial RO Plant is safe to consume!
Therefore, for your convenience, we have listed a guide for checking whether water from your Commercial RO Plant is safe to consume or not!
A guide for checking your commercial RO Plant is provided below:
· Quality
The water you are drinking is translucent, which says everything about it. Keep a watch on your water because, on occasion, even the newest and greatest RO Plants may discharge turbid water, if the contamination level is too high and the filters degrade quickly.
Lead, fluoride, and other dangerous TDS pollutants are present in turbid water, which a RO plant typically filters out, leaving only the beneficial minerals. Check to see if your Commercial RO Plant can handle hard water. Therefore, as soon as you notice that the colour or flavour of the water differs from what you are used to, ask for service.
· Take note of the pre-filter
Due to contaminated water negatively affecting the RO filter's quality, our most recent Commercial RO Plants are equipped with pre-filters that collect bigger particles and heavy silt, before they enter the RO membrane extending the life of the latter.
· Install pre-filters of good quality
The sediment filter and the carbon filter are the two filters that are typically included in drinking water Commercial RO Plants. While, maintaining the latter helps remove chlorine and other harmful impurities that shorten the life and performance of the RO membrane, keeping the former helps strain out sediment and silt.
When filters are used continuously without being replaced, contaminants are transferred to your RO water, therefore, make sure replace your filter at least once every three months.
· Replace the RO Membrane
The Commercial RO Plants are equipped with reverse osmosis semi-permeable membranes, which preserve minerals while filtering out contaminants, for a thorough multi-stage purification. For the membrane to work at its best, make sure it is replaced frequently. Of course, your water quality and usage will determine this.
· Keep an eye out for leaks
Even the most modern and advanced RO Plant can succumb to obstructions and damage, from abrasive outside forces. You have to make sure to get it serviced by a professional, if you notice any leaks or drips. Make sure your RO Plant is regularly serviced because leaks can frequently result in health issues.
· Continual RO Plant maintenance
You must exercise caution. Even though Netsol Water gives a lengthy warranty, regular maintenance is required. Although, Commercial RO Plants have a lengthy lifespan, even a small defect could have serious repercussions.
Therefore, maintaining your Commercial RO Plant on a regular basis is important. Also, you have to be sure to request that the serviceman checks the RO membrane operation, as well as the filter, and water quality of the output before leaving.
Manufacturer of high-quality Commercial RO Plants
At Netsol Water, we think that maintaining good health is essential and that testing your Commercial RO Plant periodically is essential. Follow the aforementioned advice to make sure you're doing it correctly, or just get in touch with us for excellent water purification and after-sales services.
For further information or to make a product purchase, contact us at +91-9650608473 or drop a mail at enquiry@netsolwater.com
