How can Industries save water?
Water in industries can be saved by raising employee knowledge, metering water usage, maximizing water use, recycling waste, installing water-saving technology and doing routine pipe checks, among other things.
We all know that only 3% of the water on Earth is pure enough to be utilized in daily life. Water usage will increase as the world's population grows. It's possible that by 2030, it'll be up to 15-20%, thus there's a need to raise awareness about how to save water in industries by reducing usage. It will also assist the industries in lowering their water bills, i.e. cess returns.
Water is typically used in industry for cooling plants and other equipment’s, product washing and preparation and the application of paint and colours to products, among other things.
To know more about how to save water in industries, let us give this blog a read!
1: You have to be aware about the current water usage.
To set a target for the next cycle, you must first determine your current water usage. It will assist you in identifying peak hours, high-water-use places and leaks.
2: Undergo routine inspections.
The installation of a monitoring system, as well as a water pressure metre and a water flow metre, will aid in the detection of leaks in pipes, joints, and valves.
3: Make sure your personnel are well-informed.
Encourage your employees to understand why water is vital and to come up with new strategies to conserve it. You can give out rewards in your firm for identifying and developing new water conservation measures.
4: Identify ways to install water-saving devices.
There are numerous water conservation devices available. Consider putting them to use. Tap aerators, for example, replace high volume taps with high pressure and low volume taps.
5: Cleaning with a minimum amount of chemicals.
In order to save water, we can use electric brooms, vacuum cleaners, or other cleaning devices (such as squeegees) in the beginning. Equipment’s should be washed when needed rather than on a regular basis. Reduce the amount of water sprinklers you use.
6: Reusable options of water.
We can save water in industries by reusing centrifugal pump seal water and other similar methods. Use condenser water for steam make-up instead of vacuum pump seal water.
7: Recycled Water.
It is a common misconception that all business processes require pure drinking water (potable water). Wherever possible, we can reuse non-potable water in plants. For example, non-potable water can be used for fire protection and pH adjustment. Installing a cooling tower to recycle water in conjunction with an efficient refrigeration loop can save up to 25% of total water usage.
8:Use of Reverse Osmosis.
Installing a Commercial/Industrial RO Plant to treat water is a good idea. Although this plant consumes energy but it is well worth it.
9:Use of ETPs and STPs.
We can install and maintain ETPs (effluent treatment plants) and STPs (sewage treatment plants) in industries to treat wastewater and recycle it for toilet flushing, floor cleaning and much more.