How to remove minerals rust and scale in pipes?
Hard water is generally not recommended for household use because of its high mineral content. It can alter the taste of your water, cause dry hair and skin, and wreak havoc on your home's plumbing. Minerals like calcium and magnesium solidify and can build up in your heating system. This mineral build-up inside your unit can trap heat or cooling, preventing it from escaping into your home. Over time, your water heater and HVAC components may corrode and break, necessitating a replacement. If you don't address the problem right away, the heating and cooling system will break down more frequently. You may also find it difficult to regulate the temperature in your home.
Hard water scale issues in HVAC systems significantly increase operating costs due to a variety of factors. A 1/8-inch layer of scale, for example, insulates heat transfer surfaces and results in a 20% to 25% reduction in boiler performance. Hard scale on boiler tube surfaces causes overheating and boiler tube failure. Scale in chiller condenser loops obstructs water flow, resulting in a 30% increase in energy consumption. Scale-coated safety valves can become inoperable, putting plant safety at risk.
Chemical-based descaling efforts are more expensive while having negative health and environmental consequences. Because some chemicals are inefficient, even greater amounts are required to dissolve scales effectively. Acids, chemical inhibitors, and chelating agents produce a significant amount of scale waste, which pollutes groundwater. Because of the toxicity of the solvents used for scale control, as well as the waste generated during the process, safe work procedures and well-maintained equipment are required in conjunction with control measures.
BIOFILM DANGERS SHOULD BE REDUCED
In cooling towers, evaporative condensers, piping, and hot water systems, biofilm and bacteria cause foul odours and the spread of infectious diseases. NETSOL water solutions alter the physical, chemical, and biological properties of water, making microorganisms less likely to attach to surfaces and form biofilm. Instead of dosing industrial systems with biocides, scale and corrosion inhibitors, or dispersants, which can increase the risk of bacterial resistance and harm to the environment, NETSOL systems use generated magnetic fields and fluid dynamics to dissolve and flush minerals in the bulk fluid flow.
CONSERVE ENERGY BY IMPROVING FLOW
The high viscosity of hard water causes friction, resulting in increased wear and tear on equipment and higher energy costs. NETSOL water descaling units can save up to 40% on energy by reducing viscosity and friction. Pumps are more efficient, require less maintenance, and last longer. Reduced friction improves heat transfer in cooling systems, reduces downtime, and lowers energy consumption.
NETSOL's maintenance-free water scale removal technologies help oil and gas production units, agricultural applications, processing plants, manufacturing facilities, mining operations, and other industries save water, reduce chemical use, conserve energy, and cut costs.
NETSOL Water breaks down the large scale-producing molecules into microscopic particles. Because the inactive, suspended particles flow freely, fluctuation pushes minerals through the systems.